FO3001B Digital 4/6/8 chambers available Sequential Compression Device (SCD) Therapy System
Product advantages：
The compression device is designed to provide therapeutic benefits for individuals with certain medical conditions. It consists of various components that ensure its functionality and effectiveness. The device is equipped with a non-breakable, dust cap to maintain air tightness during the transfer process. Additionally, the wrap-around strip is made of nylon material that is both encrypted and reinforced, making it water-resistant. To use the device, you need to connect the air hoses from the compression device to the corresponding sleeves or garments. Once the sleeves or garments are properly worn on the affected limb(s), you can turn on the compression device and select the recommended pressure level. The device will then start inflating the sleeves or garments, gradually applying compression from distal to proximal areas. It is important to allow the therapy to continue for the prescribed duration, typically 30 minutes to 1 hour. After the therapy session, the device will gradually deflate the sleeves or garments, releasing the compression. Remember to turn off the compression device and disconnect the air hoses from the sleeves or garments. Lastly, make sure to clean the sleeves or garments according to the manufacturer’s instructions and store them in a clean and dry place.
Operating Instructions:
- Connect the air hoses from the compression device to the corresponding sleeves or garments.
- Put on the sleeves or garments on the affected limb(s) ensuring a snug fit but not too tight.
- Turn on the compression device and select the appropriate pressure level as recommended by your healthcare provider.
- The device will start inflating the sleeves or garments, gradually applying compression from distal to proximal areas.
- Allow the therapy to continue for the prescribed duration, typically 30 minutes to 1 hour.
- After the therapy session, the device will gradually deflate the sleeves or garments, releasing the compression.
- Turn off the compression device and disconnect the air hoses from the sleeves or garments.
- Clean the sleeves or garments as per the manufacturer’s instructions and store them in a clean and dry place.