CHARACTERISTICS:??Pump Specification:?Size: 24cm(L)*20cm(W)*11cm(H)?Power consumption: 30w?Input voltage: 110V 60Hz;?or 220V 50Hz?Pressure range: 20-250mm?Treating time: 1-60mins?Features: Fo3001(Digital) each chamber can be partially skipped?FO3001(Digital) left massage time could be shown.Preparation1. Connect the air pump to the power supply and plug in the Air Compression Therapy.2. Connect the air pipe of the massager to the air pump.3. Make sure that the power switch on the massager is in the “Off” state.Correct use method1. Turn on the power switch of the massager, and the massager will start to inflate automatically.2. Place the massager on the part that needs to be massaged, and press the button on the massager to start the massage.3. Massage time is generally 15-20 minutes, you can set the massage time according to your own needs.4. After use, press the power switch on the massager to deflate the massager.5. Remove the massager attached to the human body and place it in a clean and dry place.Precautions for use1. When using the Air Compression Therapy, do not apply lubricating oil, perfume and other oily items on the body, so as not to affect the massage effect.2. During use, the Air Compression Therapy should be placed on the part that needs to be massaged, and then massage; Do not use in high temperatures or in direct sunlight.3. Pay attention to the massage time and frequency, generally speaking, the massage time should not be too long, and the use time should not exceed 30 minutes.4. Massage yourself properly. Excessive massage is not recommended. If the body has abnormal conditions, should stop the use in time, do not force to use.In short, the Air Compression Therapy is a very convenient massage tool, only need to follow the above correct use method, correct use, can achieve a good massage effect.